| 2.3.16-3-1 Ensure contractor has specifications for all cable and harness elements |
Phase A |
Phase B |
Phase C |
|
Ensure each cables and harnesses element has requirements captured in a specification. Ensure in the introduction or scope section of the specification states the applicable cables and harnesses elements.
|
NA
|
NA
|
TOR-2006(8506)-4494, Space Vehicle Systems Engineering Handbook, Electrical Power and Distribution chapter, Cabling section
|
| 2.3.16-3-2 Ensure contractor has properly flowed down all cable and harness requirements |
Phase A |
Phase B |
Phase C |
|
Ensure all applicable requirements are captured in cables and harnesses specifications. Sources for applicable requirements include but are not limited to: all other specification (System Specification, Vehicle Specification, Subsystem Specification, Unit Specifications, etc.), interface documents and drawings, control plans (PM&P, Contamination, EMI/EMC, etc.), compliance documents, corporate standards, etc.
|
NA
|
NA
|
TOR-2006(8506)-4494, Space Vehicle Systems Engineering Handbook, Electrical Power and Distribution chapter, Cabling section
|
| 2.3.16-3-3 Ensure all cable and harness specifications are complete by CDR |
Phase C |
|
Ensure all cable and harness specifications are completed, released, and configuration controlled by CDR with no TBXs.
|
NA
|
NA
|
TOR-2006(8506)-4494, Space Vehicle Systems Engineering Handbook, Electrical Power and Distribution chapter, Cabling section
|